E-Bond 108 High Build Epoxy Coating- 2 gallon kit
Description
E-BOND 108 is a 2 component epoxy resin based coating which is Solvent-Free, 100% Solids and 100%Reactive. This two coat system comes in distinctively different colors to distinguish between the base coat and the top coat. The 108 is a "tile like" high build protective coating providing a corrosion resistance, damp-proofing waterproofing vapor barrier system for concrete masonry concrete block, brick, etc. The 108 is excellent as a two coat system for protection on splash-zone and underwater surfaces. The coatings have been designed to resist splash zone wave action and underwater currents.
FEATURES AND BENEFITS
Convenient easy to use 1:1 by volume mixing ratio
Two coat system comes in distinctively different colors to distinguish between the base coat and the top coat.
Excellent bond to most structural materials
Easy to apply, creamy paint-like viscosity. The 108 lays up with a roller or brush to an average thickness of between approximately 6 and 9 mils. (ASTM-D-638)
Provides a hard dense tile like finish
Good resistance to many chemicals for long-term protection
Abrasion resistant for long term wear
Hi-Build has a tensile modulus of approximately 90,000 psi and when cured it has a tensile strength in excess of 3,000 psi.
After cure the 108 coat is approved for contact with potable water. (ANSI /NSF 61-1992 approved) Zero VOC – Fully Reactive, No low boiling constituents
E-Bond 108 Conforms to VDOT EP-3T/3B; ASTM C-881, Type VII, Grade 2, Class D, E & F.
PURCHASE INCLUDES:
1 gal E-Bond 108 Part A
1 gal E-Bond 108 Part B
Orders are made for every order and current wait time is a minimum of 10-12 weeks to ship.
For large project/quantity purchases please contact E-Bond for large quantity quote of material.